PowerZone Connect 1502 - Interstate Audio

The PowerZone Connect 1502 is a solid, reliable, full rack, DSP amplifier with network connection for easy configuration and control. Its network can be wired or wireless and allows access to the PowerZone Control web app’s system setup and audio configuration menu. From here you can manage sound zones, inputs/outputs, update firmware, import speaker pre-sets and access many professional EQ settings – configuration takes only a few minutes and can even be set up from your phone’s browser.

Pro Features

  • More Power. Still Connected –2U, full rack. Next level power with 2 channels – up to 1500 W total system power for bigger installs and larger locations.
  • A powerful extension to the PowerZone connect series of full matrix DSP amplifiers with the same set-up and configuration via the same PowerZone Control web app.
  • Connect via the amps Wi-Fi, or direct via the network port. Use any device and any browser. Even set-up from your phone.
  • Connect to the system with PowerZone Control – configure the complete system – input sources & output channels, set up sound Zones, EQ, routing and more.
  • Smart & connected – means you can update new features with downloadable firmware updates, install speaker EQ files, back up and restore the system settings.
  • GPIO interface enables adding of any standard remote control (potentiometer) or connect to smart automation controllers with our 3rd Party drivers.
  • Link multiple amps – via S/PDIF (Master /Slave)
  • Pascal’s UMAC Class D amplifier technology is inside, with market proven, ultra-reliable amplifier modules.
  • Xilica Lua Device Driver available via our Redmine
  • Channels: 2 x Lo-Z/1 x Hi-Z
  • Output Power @ 2Ω: 2 x 750 W(SE)
  • Output Power @ 4Ω: 2 x 750 W(SE)/1 x 1500W(BTL)
  • Output Power @ 8Ω: 2 x 400 W(SE)/1 x 1500W(BTL)
  • Output Power @ 70V: 1 x 1200W(BTL)
  • Output Power @ 100V: 1 x 1500W(BTL)
  • Total System Power: 1500W
  • Power Consumption: 350W
  • Dimensions: 88x440x332mm (3.5 x 17.3 x 13.1 in)
  • Weight: 5.9kg
  • Output Circuitry: UMAC Class D - full bandwidth PWM modulator with ultra-low distortion
  • Output Voltage: 80 Vp / 160 Vpp (SE unloaded) 160 Vp / 320 Vpp (BTL unloaded)
  • Signal To Noise-Ratio: > 108 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load)
  • THD+N (typical): < 0.05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power)
  • Frequency Response: 20 Hz - 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
  • Protection Circuits: Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
  • Power Supply: UREC universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
  • Operating temperature: 0-40°C
  • Operating Voltage/Frequency: Universal Mains, 100-240V, 50-60Hz
  • Standby Consumption: < 0.5W
  • Accessories: 2x Rack ears, 4x adhesive feet
  • Power Ratings: 1% THD @ 120VAC and 230VAC

SE – conventional, single ended output mode 

BTL – bridge-tied load output mode