Rio R22-WPXM - Interstate Audio

The XILICA R22-WP-X and R22-WP-M legacy products are 2×2 analog / 2×2 Dante I/O interface panels on a 2 gang sized flush or surface mount wall plate (surface mount back box included). The only difference between these two models is the analog I/O connections provided on the front panel of each model. The R22-WP-X wall plate model provides XLR analog I/O connections only. The R22-WP-M model provides a mix of XLR, dual RCA (L+R summed), and stereo 3.5mm (L+R summed) analog I/O connections.

The front panel of both models provides Mic/Line input and 48v Phantom power selection on a per channel basis via recessed on/off switches. Three (3) status LED’s indicate panel power, when the mic input is selected, and when phantom power has been activated. The rear of both models provides an RJ45 network audio connection and an external power supply connection. Power both models with a PoE switch or router or use the included external power supply. The R22-WP-X and R22-WP-M are a two piece design with the decora-style outer cover snapping onto the metal main body panel and are available in all black, all white, or black/white and white/black colour combinations as shown above.

    Inputs and Outputs

  • Input Impedance: >10k Ohms
  • Output Impedance: 50 Ohms
  • Maximum Level: +20dBu
  • Type: Electronically balanced
  • Phantom Power: 48v
  • Audio Performance

  • Frequency Response: +/- 0.1dB (20 to 20kHz)
  • Dynamic Range: 110dB (unweighted)
  • CMRR: >100dB (50 to 10kHz)
  • Crosstalk: < -100dB
  • Distortion: 0.002% (1kHz @ +4dBu)
  • Digital Audio Performance

  • Sampling Rate: 48kHz
  • Analog Converters: High Performance 24-bit
  • Front Panel

  • Dip Switches: Select Mic/Line Input and Phantom Power Per Input
  • Status LED's: Power and Data ( on RJ45)
  • Connectors: Dual XLR I/O(R22-MP-X); xlr, Summed RCA's, Summed 3.5mm I/O (R22-MP-M)
  • Cover/Body Colour: Blk, Wht, Blk/Wht, Wht/Blk
  • Rear Panel

  • Network Audio I/O: RJ 45 Connector
  • Power: External Power Connector
  • General

  • Physical Design: Decora Style Front Cover Snaps onto Metal Main Body Included
  • Surface Mount Brackets: Included
  • Power: 12VDC (Included) or PoE
  • Dimensions (WxHxD): 4.60” x 4.60” x 2.00”
    117mm x 117mm x 50mm)
  • Weight: 1/2 lbs (227 grams)